4
4
outlet. Make sure to use the power adapter that came with your modem,
as others may be of different voltages and could damage your modem.
3.
Turn on the modem by pressing the button on the back of the modem. The
CTS and MR lights should illuminate.
Step Three: Installing the Drivers
Windows 95
Turn on your computer. When the Update Driver Wizard appears, insert your
Installation CD-ROM into your CD-ROM drive and click
Next
. When the driver is
found, click
Finish
to complete your installation.
Windows 98
Turn on your computer. When the Add New Hardware Wizard appears, insert
your Installation CD-ROM into your CD-ROM drive and click
Next
. Select
Search
for the best driver for your device (Recommended)
and click
Next
. Select
CD-
ROM drive
and click
Next
. When the driver is located, click
Next
. Click
Finish
to
complete your installation.
Windows 2000
NOTE:
Windows 2000 users must be in administrator mode to properly
add any new hardware.
Turn on your computer and log in. Windows will detect your new modem and
clip the ferrite
clamp around the
end of the RS-232
cable closest to
the modem