manualshive.com logo in svg

US Robotics 002605-00 -, Installation Manual, Page: 5 / 152

Share
Download
US Robotics 002605-00 - Installation Manual Download Page 5

W

ELCOME TO 

x2

 

T

ECHNOLOGY 

I

NFORMATION 

A

CCESS

1

The latest breakthrough in
online communications

Until now, 33.6 kbps was thought to be the
practical limit for speed over standard phone
lines. Now, x2 Technology shatters that
barrier, to bring you high speed downloads. x2
Technology is capable of 56kbps downloads,

but, due to FCC rules which restrict power
output of your service provider’s modems,
current download speeds are limited to 53
kbps. This modem is software upgradable,
allowing easy upgrades to new features and
enhancements as they become available.

An integrated end-to-end
solution from the leader

3Com is well positioned to bring you x2
Technology. Our U.S. Robotics Sportster

®

modems are the world's number one seller,
and our Total Control

TM

 and Courier

TM

 product

lines are favored by many Internet service
providers. This widespread acceptance allows
3Com to offer x2 Technology to virtually
anyone.

Summary of Contents for 002605-00 -

























































































































































Reviews:

No comments