QDXLE
INSTALLATION INSTRUCTIONS &
WIRING DIAGRAMS
Updated 3/25/19
40-000101_IIS
US LED | 6807 PORTWEST DR. | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com
Trunnion Mount (DYT1)
A.
Affix bracket –surface mount to mounting surface using appropriate hardware (supplied by installer)
B.
Affix fixture to mount using fixture mounting screws, lockwashers, washers and nuts
C.
Adjust fixture position angle by removing position locking screw, loosening pivot screw rotating to designated position, tightening pivot
screw and replacing locking screw (FIG 4).
D.
Run power to the Dorado back housing using a liquid tight conduit fitting (supplied by installer).
