6
US
HORIZON
®
Toll Free Phone: (877) 728-3874
Toll Free Fax: (888) 440-9567
Phone: (661) 775-1675
Fax: (661) 775-1676
ushorizon.com
28539 Industry Drive, Valencia, CA 91355
SoRRENTo SlidiNg ShowER dooR KiT
3
A
3
NOTE: Track Holder Fittings shown orientated
for installation. Set Screws at Top Cover secure
Header in place. Set Screws at bottom base adjust
Header height if needed after installation.
B
3
Minimum
1-1/2” (38 mm)
from edge
EXTERIOR
MOUNTING HEIGHT
A
3
B
3
Using Track Holder Fitting Base as a guide,
mark and drill holes for Header Support Bar.
MOUNTING POSITION
2
Determine Mounting Height and mark wall.
Measure opening width at mounting points.
Cut CAMH1 Header Support Bar
1/2” (12 mm) shorter.
EXTERIOR
Header
Support Bar
HEADER LENGTH
4
1
3
SLIDING DOOR
EXTERIOR
SLIDING DOOR
4-7/8” (124 mm)
MOUNTING HEIGHT
OVERALL
HEIGHT
4
Bottom of
Track Holder
Track Holder
Base
NOTE: Header Support Bar is
made of stainless steel. Use
hacksaw or special cutting tool.
Unpack Track Holder Fittings. Remove top cover.
2
Track Holder
Base
Track Holder
Top Cover
CAMW2
Track Holder Fitting
(Two Included)
Screws and Anchors
NOTE: Allow minimum 1-1/2” (38 mm) from edge of curb.
SiTE PREPARATioN
Prepare for Header Support Bar
FRAME FABRiCATioN
Cut Header Support Bar
