Page 2
For technical questions, please call 1-800-444-3353.
Item 60390
IMPORTANT SAFETY INFORMATION
Service Cart Safety Warnings
1. Do not ride or climb on cart. Keep away from children.
2. Do not exceed 220 lb. capacity, evenly distributed.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
3. Use only on a flat, level surface able
to support Cart and load.
4. Wear ANSI-approved safety
goggles during assembly.
5. Inspect before every use; do not use
if parts are loose or damaged.
6. Maintain product labels and nameplates.
These carry important safety information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram
near the end of this manual. 10 mm, 14 mm and 17 mm sockets and/or wrenches are required for assembly.
Unwrap and separate all parts on a clear work area.
Attaching Posts to Bottom Tray
Lay the Bottom Tray (2) (the tray with four sets
of four holes on the bottom) on the floor and
attach the Posts (7) to the outside corners of
the tray using sixteen Bolts (9), Washers (11),
Lock Washers (10), and Nuts (8).
Bottom Tray
(2)
Post (7)
Bolt (9)
Washer (11)
Lock Washer
(10)
Nut (8)
Figure 1
Summary of Contents for 60390
Page 1: ......
