manualshive.com logo in svg

US Digital E3, Assembly Instructions, Page: 2 / 2

Share
Download
US Digital E3 Assembly Instructions Download Page 2

E3 Assembly Instructions 

 

[email protected] 

▪

 www.usdigital.com 

Local: 360.260.2468 

▪

 Sales: 800.736.0194 

Support: 360.397.9999 

▪

 Fax: 360.260.2469 

1400 NE 136

th

 Ave. 

▪

 Vancouver, Washington 

▪

 98684 

▪

 USA   

1.0 

 Page 2 

 

Step 4: 

Encoder Module Installation 
Orient the module with the connector pins toward the top. 

Slide the module on to the base from front to back, being 

careful not to damage the disk or module. Fit the module 

on to the two alignment pins on the base, and secure with 

two 4-40 1/2" pan head screws (supplied).

 

 

Step 5: 

Cover Installation 
Place the cover over the assembly and secure with two  

4-40 5/8" flat head screws (supplied).

 

 

 

 

 

 

Module Screws: 

3.5-4 in-lbs 

 

Cover Screws: 

2-4 in-lbs torque 

 

Summary of Contents for E3

Page 1: ...hole of the base While holding base and centering tool together slip centering tool onto the shaft and slide the assembly down to the mounting surface Press to form a good bond then remove centering tool and continue with standard mounting instructions Step 2 Hubdisk and Spacer Alignment Lay spacer tool flat on the base so that it straddles the shaft Orient hubdisk on the shaft with the set screw ...

Page 2: ...Orient the module with the connector pins toward the top Slide the module on to the base from front to back being careful not to damage the disk or module Fit the module on to the two alignment pins on the base and secure with two 4 40 1 2 pan head screws supplied Step 5 Cover Installation Place the cover over the assembly and secure with two 4 40 5 8 flat head screws supplied Module Screws 3 5 4 ...

Reviews:

No comments