Device setup and connection
Mounting the mirror ball motor
Choose a suitable supporting location for the mirror ball(4). Reliable operation requires the
mirror ball motor (2) to be mounted in absolute horizontal position. Ball and motor must be
istalled outside the reachable area of persons. Now screw the mirror ball motor to the surface using
three fitting screws (3). The motor fastening must be made such that it is capable of supporting at
least five times the required weight. After having checked the safety for the fastening, hang the supp-
lied chain inti the key ring of the mirror ball motor and the mirror ball. Make sure that the rotation of
the mirror ball is not slowed down by fixed parts or decorative parts. The mirror ball including motor
must be secured using an appropriate safety cable in the chain or via a safety net.
Taking into service
Connect the earthed plug of the gear motor to a socket outlet and check the correct function of the
device. To obtain the best possible light effect you must direct the point projector directly to the
mirror ball.
Installatie en gebruik
Haal de rookmachine uit de verpakking. Sluit de netaansluiting van de afstandsbediening nog niet aan,
Maintenance and care
Pull the main cord before cleaning the device. During cleaning,
make sure that the area below the device is restricted.
To clean the device from the outside, use a soft, dry cloth or paint brush. Do not use aggresive cleaning
agents which could damage the surface of the device enclosures.
Proper use
The mirror ball is only approved for connection to 230V/50Hz AC voltage and for indoor use. Protect
the device from moisture and excessive dirt. The device is not suitable for industrial use. A use other
than described above damages the product and furthermore involves hazards such as short-circuit,
fire, electric shock etc. The mirror ball may not be modified or rebuilt and the enclosures are not to be
opened! The safety notes must be observed!
ATTENTION!
The mirror ball is not suitable for permanent operation!
Product description
To obtain best light effects of the mirror ball use a power point projector type Par 36 (not included) to
illuminate the mirror ball. The colored punctual light effect of the projector is projected on the mirror
ball with 20 cm diameter. The mirrors of the ball then reflect small light points in different directions.
Driven by their own gear motors, color screen and mirror ball revolve continuously. This produces an
ever chaninging light effect.
© US Blaster Europe BV
(3)
(2)
(1)
(4)
