US Blaster Turntable USB 7363 User Guide
5
4.
Assembling the turntable
Your turntable is supplied partly disassembled. You can read how to assemble the different
components below
.
4.1 Assembling revolving deck
Put the revolving deck (3) on the turntable spindle. There are two brad openings in the revolving deck.
Turn one of these openings so that the driving spindle is visible through it. Then connect the driving
belt to the revolving deck so that it covers the driving spindle.
Assembling revolving deck
Fastening driving belt
4.2 Fastening counterweight
Screw the separate counterweight (6) on to the
pick-up arm, until it can't be turned any more. Do
not screw the counterweight on to the arm!
Fastening counterweight
4.3 Setting needle pressure
Put the control for the antiskating compensation
(7) in the 0 position. Then remove the protective
cap (12) of the MD element.
Now move the arm carefully to the revolving deck
(not above it!) and lower it with the lever (8).
The needle may not make contact with the
revolving deck!
Turn the counterweight on the end of the pick-up arm so that the arm is completely balanced.
Not correct
Arm is balanced
Not correct
