USB 7340
Dual Media Player with mixer
36. CUE BUTTON
- In pause mode use the search button to search the position you want.
- Now press the PLAY button.
- Press CUE button to go back to where you started.
37. PGM BUTTON
In STOP mode, you can program several tracks (20 tracks max.)
- Press the PAUSE button to enter the stop mode.
- Press the PGM button to enter the program mode.
- Use the skip track buttons to select the track you want, then press the PGM but-
ton to enter your choice.
- Use the skip track buttons again, to select the next track, then press the PGM but-
ton again to enter your choice.
- Repeat the operation to select all the tracks you want to listen.
- Press the PLAY / PAUSE button to start playback.
38. REPEAT BUTTON
Use this button to repeat one track or all the tracks of the USB or SD CARD.
39. TIME BUTTON
Use this knob to choose the time mode: Elapsed time, remaining (track) time or total
remaining time.
40. SEARCH BUTTON
When the indicator LED is light, dial the jog for quick search forward and backward,
when the jog is unmoved for 8 seconds, the indicator would be off.
41. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to
pause or from pause to play.
42.JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned
in the forward direction when the shuttle dial is turned clockwise from the neutral
position, and in the reverse direction when the shuttle dial is turned counterclockwi-
se. The scanning speeds up when the shuttle dial is turned further.
43. INPUT FADER
Controls individual source levels for CH 1-2 in the mix.
44. LED METER
Indicates the master output level.
45. REPLACEABLE CROSSFADER
Achieves clean segues between the two input channels. Hard left selects channel 1, Hard right
selects channel 2. With the crossfader centered, both assigned channels are live. Use the cross-
fader for fast and seamless segues from one selected channel to the other.
