Changing Weighing Units
Press CAL/MODE button until the desired
weighing unit is displayed. They are in the
following order:
g - oz - dwt - ozt - ref 5 - ref 10 - ref 20 - ref 50 - g
To Weigh
1. Place the scale on a firm, flat surface.
2. Open the lid by pushing the two bottons on
the side of the scale and lift.
3. Turn on the scale.
4. If using a bowl or any other container, place
the container on the platform after turning on
the scale. Press Tare button to zero the scale.
5. Place object(s) to be weighed on the platform,
or into weighing container.
6. The weight will now be displayed.
7. Replace the battery when the scale Displays
Overload Warning
Never Place more weight on the platform than
the scale is designed for. If this occurs, the
display will show O-Ld.
Remove your weight immediately
as permanent damage could occur that is not
covered under your warranty.
Summary of Contents for US-TT-1000
Page 8: ......
