32
Note:
Before checking channel data on Ursalink Cloud, you need to configure UC11-N1 in Toolbox and
create channel on Ursalink Cloud. The channel ID of channels on Toolbox and Ursalink Cloud
should be correspondent.
5.Configuration via TTN
5.1 Add UC11-N1 to The Things Network
5.1.1 Create an Application in The Things Network
TTN server uses Applications to create groups of devices.
Gateways are associated with user account but not Applications. All gateways connected to TTN
servers forward all LoRaWAN data traffic to the TTN message router. The TTN network server
filters LoRa traffic by Application ID so that the data is routed to the correct user/application and
users are only able to access data from devices registered to their account.
Channel Settings
Item
Description
Default
Channel ID
Assign the channel for the slave device. 8 channels
selectable.
Null
Channel Name
Set the name to identify the remote channel. It cannot be
blank.
Null
Type
Read command, options are "Coil", "Discrete", "Holding
Register (INT16)", "Input Register (INT16)", "Holding Register
(INT32)" and "Holding Register (Float)".
Holding
Register
(INT16)
Sign
To identify whether this channel is signed.
Default: Unsigned.
Null
Decimal Place
To indicate a dot in the read into the position of the channel.
For example: if the channel raw data is 204d, and a Decimal
Place is equal to 2, then the actual value is 12.34.
Null
Raw Data
Show the raw data of this channel (Hex).
Null
Value
Show the conversion results (Dec).
Null
Unit
Enter the unit for the channel’s value.
Null
Summary of Contents for UC11-N1
Page 1: ......
