EM500-UDL User Guide
2
Safety Precautions
Ursalink will not shoulder responsibility for any loss or damage resulting from not following
the instructions of this operating guide.
The device must not be disassembled or remodeled in any way.
Please clarify your application environment before deployment so that the device can
function well.
The device is not intended to be used as a reference sensor, and Ursalink will not should
responsibility for any damage which may result from inaccurate readings.
Do not place the device in places that are already out of measuring range or where the
temperature is below/above the operating range .
Make sure electronic components do not drop out of the enclosure while opening.
When closing the lid, make sure the lid is fitted the right way, so that the enclosure is
properly sealed.
When installing the battery, please install it accurately, not reversely or with wrong
model.
The device must never be subjected to shocks or impacts.
Declaration of Conformity
Ursalink EM500-UDL is in conformity with the essential requirements and other relevant
provisions of the CE, FCC, and RoHS.
© 2017-2020 Xiamen Ursalink Technology Co., Ltd.
All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or individual
shall copy or reproduce the whole or part of this user guide by any means without written
authorization from Xiamen Ursalink Technology Co., Ltd.
For assistance, please contact
Ursalink technical support:
Email: [email protected]
Tel: 86-592-5023060
Fax: 86-592-5023065
Revision History
Date
Doc Version
Description
April 7, 2020
V 1.0
Initial version
EM500-UDL is short for EM500-UDL-915.
Summary of Contents for EM500-UDL
Page 1: ......
