EM500-PT100 User Guide
11
5. Click “Power On” to turn on the device or “Power Off” to turn off the device.
6. Enter password (default password:123456) and press Enter key to change device status.
5.3 Turn ON/OFF via Button
1. Remove screws on the bottom of EM500-PT100 and take off the upper enclosure.
2. Find the button beside the battery.
3.Press the button until LED blinks to turn on or off the device. (about 3 seconds)
Press the button until LED blinks rapidly to reset the device to factory default. (Over 10 seconds)
6. Sensor Configuration
Ursalink EM500-PT100 series sensor can be monitored and configured via NFC technology. In
order to protect the security of sensor, password validation is required when turning on/off the
sensor or changing configuration. Select one of the following ways to configure EM500-PT100
sensors.
6.1 Configuration via Smartphone APP
Make sure Ursalink Toolbox APP is downloaded and installed on your smartphone.
Summary of Contents for EM500-PT100
Page 1: ......
