LoRaWAN Agricultural Kit Quick Guide
13
C. Connect UC1114 to computer via micro USB port and open the Toolbox to configure
UC1114 if necessary.
6. EM500 Configuration
6.1 Turn on/off the Sensor
1. Take off the mounting bracket and waterproof case.
2. Pull out the insulating sheet on the side of the battery.
3. Hold on the power button to turn on/off the sensor as following actions:
Function
Action
LED Indication
Turn On
Press and hold the button for more than
3 seconds.
Off →
Static Green
Turn Off
Press and hold the button for more than
3 seconds.
Static Green
-> Off
Reset
Press and hold the button for more than
10 seconds.
Note:
EM500 will be switched on after reset.
Blink 3 times.
Check On/Off Status
Just a quick click.
Light On:
Device is on.
Light Off: Device is off.
EM500 sensors can be also powered on/off or reset by mobile APP or software as shown in
Chapter 6.2.
Summary of Contents for EM500-LGT
Page 1: ......
