Ursalink EM500-CO2, User Manual

Page: 8 / 22

EM500-CO
2
User Guide
8
5. Sensor Configuration
Ursalink EM500-CO
2
sensor can be monitored and configured via one of the following methods:

Mobile APP (NFC);

Windows software (NFC or Type-C port).
In order to protect the security of sensor, password validation is required when turning on/off the
sensor or changing configuration. Default password is
123456
.
5.1 Configuration via Smartphone APP
Preparation:

Smartphone (NFC supported)

Toolbox APP: download and install from Google Play or Apple Store.
5.1.1 Read/Write Configuration via NFC
1. Enable NFC on the smartphone and open “Toolbox” APP.
2. Attach the smartphone with NFC area to the device to read basic information.
Note: Ensure your smartphone NFC area and it is recommended to take off phone case before
using NFC.
3. When you perform one of the following operations, enter the password and attach the
smartphone with NFC area to the device until the APP shows a successful prompt.

Turn on/off the sensor

Reset the sensor

Tap “Write” to change settings in “Device > Settings”.