Urrea PP921A User Manual And Warranty Download Page 18

18

engine stop/start lever and drive lever (clutch 
lever) closed and walk along with it self-propel-
ling to start mowing.

Working Advices
1. Walk, never run with the mower, be very care-
ful when mowing uneven or rough ground.
2. Mow across slopes, never up and down.
3. Be careful when changing the direction of the 
mower on a slope.
4. Do not mow excessively steep slopes.
5. The best result will be achieved if the grass is 
dry. Wet grass will tend to clog the blade and 
the grass collection system.
6. Grass grows at different rates at different 
time of the year. Never use the lowest cut-
ting height for the first cut of the season or in 
drought conditions.
7. Only about one thirds of the grass height 
should be cut.
8. When mowing with mulching, to ensure that 
the cut grass can be scattered efficiently, do not 
cut high or wet grass. When you have been cut-
ting for several minutes, please stop the mower, 
and clean the blade and the deck.
9. Do not remove grass debris in the mower 
casing or on the blade by hand or with your 
feet. Instead use suitable tools such as a brush 
or broom.

EMPTYING THE GRASS BAG
As soon as grass clippings start to trail the lawn 
mower, it is time to empty the grass bag.

 IMPORTANT: Before taking off the grass bag, 

switch off the engine and wait until the blade 
has come to a stop.
1. To take off the grass bag, use one hand to lift 
up ejector flap and the other to grab onto the 
carry handle. The ejector flap automatically falls 
down after removing the grass bag and closes 
off the rear chute opening.
2. Empty the grass debris in the grass bag, and 
refit grass Bag.

 IMPORTANT: If any grass residue is caught in 

the discharge chute, clean it using a brush .Do 
not remove grass debris in the mower casing or 
on the blade by hand or with your feet. Instead 
use suitable tools such as a brush or broom. To 
ensure that the cut grass can be collected into 
grass Bag, the discharge opening and inside the 
mower casing must be cleared of any blockage.

MAINTENANCE

GENERAL RECOMMENDATIONS

• Always observe safety rules when perform-
ing any maintenance.
• The warranty on this lawn mower does not 
cover items that have been subjected to oper-
ator abuse or negligence. To receive full value 
from warranty, operator must maintain 
the lawn mower as instructed here.
• Changing of engine-governed speed will 
void engine warranty.
• All adjustments should be checked at least 
once each season.
• Periodically check all fasteners and make 
sure these are tight.

 WARNING: Always stop engine, disconnect 

spark plug, and ground against engine before 
performing any type of maintenance on your 
machine.

 WARNING: Before performing any mainte-

nance or cleaning work, switch off the engine 
and wait until the blade has come to a stop.

CLEANING 
GENERAL CLEANING 
The lawn mower should be cleaned thoroughly 
every time after it has been used.
Always clean your lawn mower immediately 
after use.
Do not allow grass cuttings and other debris 
to become dry and hard on any of the mower 
surfaces.
Dried grass remnants and dirt may impair the 
mowing operation.
Check that the grass chute is free of any residual 
grass. Remove any such residue.
Check the underside of the lawn mower and 
the blade mount for this purpose ,tilt the Lawn 
mower onto its left side (opposite the oill filler 
neck).

 IMPORTANT: Before placing the lawn mower 

on its side, fully drain the fuel tank using a pet-
rol extraction pump. Do not tilt the lawn mower 
by more than 90 degrees.

MAINTENANCE OF THE SPARK PLUG.
1. Once the engine has cooled , pull off the 
spark plug with a twist.
2. Remove the spark plug using a spark plug 
wrench
3. Clean the spark pl ugh with a wire brush(not 
supplied ).
4. Using a feeler gauge set the gap to 0. 75mm

Summary of Contents for PP921A




























Reviews: