urmet domus MATIBUS 1752/20D, User Manual

Page: 3 / 8

POWER SUPPLY REF. NO. 1752/20D
ASSEMBLY AND CONNECTIONS
INSTRUCTIONS FOR CONNECTIONS
RJ45 connectors on the both sides of wires should be
installed on T-568 standard. The list of wires colors and
their corresponding pin standard T-568 shown in the figure
below:
No. Color
1 Orange-white
2 Orange
3 Green-white
4 Blue
5 Blue-white
6 Green
7 Brown-white
8 Brown
For connecting the risers with Dys-Dek 1052/54RM use
RJ12 connectors plug (6P6C). The list of wires colors and
their corresponding pins shown in the table below:
No. Color
1 Green-white
2 Orange-white
3 Blue
4 Blue-white
5 Orange
6 Green
A pair of brown color-coded wires should be connected to
terminals:
R1 – Brown-white
R2 – Brown.
The list of connectors, wires colors and their
corresponding pins shown in the table below:
Connectors
LU1 i LU2 (RJ12)
.
No. Color Designation Description
1 Green-white 0L
Ground line of
doorphones
2 Orange-white VB
Video signal.
Line B twisted
pair
3 Blue R2
Positive (+)
video power
supply (+18V
DC)
4 Blue-white R1
Ground video
power supply
5 Orange VA
Video signal.
Line A twisted
pair
6 Green LU
Line of
doorphones
On the second end of this wire should be installed
plug RJ45 using T-568 standard. Plug with RJ45
connect to Dys-Dek ref. No. 1052/54RM.
Connectors
WE DOD (RJ45) .
No. Color Designation Description
1 Orange-white 0L
Ground line of
doorphones
LU1
2 Orange LU1
Line of
doorphones
LU1
3 Green-white 0L
Ground line of
sound
4 Blue DD+
Data line of
secondary bus
data DG+
5 Blue-white DD-
Data line of
secondary bus
data DG-
6 Green LD
Line of sound
for secondary
bus data
7 Brown-white 0L
Ground line of
doorphones
LU2
8 Brown LU2
Line of
doorphones
LU2
The second end of this wire should be connected to
power supply ref. No. 1052/31R…33R.