22
DS1375-008E
6. The main page will appear when logging on automatically.
7. On the top menu, press System and select the Wizard to proceed with the guided and simplified
configuration of all main parameters.
The following table lists the configurable features. Refer to the installation and configuration booklet for
more information.
Step
Wizard step
Description
1
License
Can be used to integrate the installed basic license, with additional
licenses by means of the license files.
2
System
This can be used to configure/check the VLAN network parameters.
3
VoIP Phones
This can be used to automatically acquire the extensions of the
system.
4
VoIP inte Extensions This can be used to automatically acquire the extension gateways.
5
VoIP L.U. / ISDN / GSM
interfaces
This can be used to automatically acquire the gateways of analogue
line, ISDN, Urmet and GSM.
6
Provider VoIP
This can be used to configure the VoIP lines to gateway provider for
traditional third-party lines and third-party PBX.
7
FAX
This can be used to activate fax channels in iPerTAlk.
8
Video Entry Devices
This can be used to automatically acquire IP/SIP door units and video
door phone.
9
Interactive Voice Response
This can be used to configure the pre-installed automatic answering
service (ITM) for incoming calls.
10
Call routing
This can be used to configure incoming and outgoing routing rules.
8. To load an additional license, follow the next step, otherwise go directly to step 11.
