44
DS4119-001A
6.4.5 Repeater mode
With a repeater you can increase the range of your base station. At rst, you must activate the repeater
mode from your phone:
1. Press <MENU> and <UP/DOWN> to select
BS SETTINGS
.
2. Press <OK> and <UP/DOWN> to select
REPEATER
.
3. Press <OK> and <UP/DOWN> to select
ON
to activate the repeater mode, select
OFF
to deactivate
it.
4. press <OK> to con rm.
With the repeater mode activated, refer to your repeater user manual about how to register to your
phone base station. After successfull registration, your repeater is ready for use.
6.5 REGISTRATION
IMPORTANT
:
When you purchase a Icarus system, all handsets are already registered to your
base, so you do not need to register them. Handset registration is only necessary
when you buy extra handsets or if a handset has become faulty. You can register
additional handsets to have up to ve handsets per base unit, with each handset’s
number (1 to 5) shown on its display. (Note: each handset can only be registered to
one base.)
To register a new handset to your base:
1. Press and hold <PAGE> on the base station for more than ve seconds, to put the base station
into registration mode. It will stay in registration mode for about 1 minute, so the following handset
sequence must be completed within this time.
2. Press <MENU> and <UP/DOWN> to select REGISTRATION.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> to con rm, and the display will show PLEASE WAIT.
If the handset registration is successful, you will hear a con rmation tone and the <antenna icon> will
stop ashing.
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the handset registration is
unsuccessful, the <antenna icon> will still ash.
6.6 RESET YOUR PHONE
You can reset your phone to the default settings . After a reset, all your personal settings, call list
entries, redial list entries, and answering machine messages will be deleted but your phonebook
remains unchanged.
1. Press <MENU> and <UP/DOWN> to select
DEFAULT
.
2. Press <OK> and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press <OK> to display CONFIRM?
5. Press <OK> to con rm, and the phone will be reset to its default settings.
Summary of Contents for ICARUS 4119
Page 47: ...47 DS4119 001A...
