10
Initial use / starting up – Wireless doorbell button
Wireless doorbell button:
assembly, inserting batteries, labelling the name plate
1
1
Release the screws of the cover of the wireless doorbell button with the
Allen key to remove the top.
Releasing the screws
Release the screws of the cover of the wireless doorbell button with the
Allen key to remove the top.
2
2
Note:
If possible, do not install the wireless doorbell button on metallic
parts, as this reduces the transmission range significantly.
Fasten the lower part of the wireless doorbell button to the wall through the
fastening holes with the screws provided.
Mounting holes
