Step 1
–
Program an Engineer’s Password
Move the
EXPL/PROG
jumper to the
PROG
position
–
In the following example a 6-
digit Engineer’s Password of
123456
will be programmed
–
In summary move the
EXPL/PROG
jumper to the
PROG
position, press
00 0 6 123456 #
then move the
EXPL/PROG
jumper to the
EXPL
position.
Step 2
–
Program a Door Open Code
In the following example a code of 2580 will be programmed in to memory position 1
–
Wait 30 seconds for the keypad to exit from the programming mode.
00
0 6 123456
#
Engineer’s Password
is stored in memory
position 1
Group
Number of digits in
the Engineer’s
Password (3 to 8).
Engineer’s
Password
Confirm
123456
01
0
4
2580
#
Engineer’s
Password
Memory
position
Group
Digits in the
door open code
(3 to 8).
Door Open
Code
Confirm
In summary press
123456 01 0 4 2580 #
then wait 30 seconds
