PUSH BUTTON PANELS
PUSH BUTTON PANEL EXIGO
−−−−
sec.3g
BIBUS 2
nd
Ed. VOP - Technical Manual
PUSH BUTTON PANEL EXIGO
PANELS FOR DEDICATED FLUSH-MOUNTING BOXES
2 ROWS OF BUTTONS
Fit the seals
provided with
the door unit.
Fit the seals
provided with
the door unit.
B
B
B
Screws B are provided with the door unit.
NAME TAG BACK-LIGHTING LED CIRCUIT
FASTENING PROCEDURE
Proceed as follows to fasten the name tag lighting LEDs:
Fix the spacers to the flush-mounting box and fix the LED circuit to
the spacers.
§
NAME TAG ASSEMBLY AND FRONT PANEL
FASTENING PROCEDURE
Exigo panels are provided with a brass name tag (not engraved) which
may be replaced by an engraved brass name tag or an anthracite grey
PVC name tag.
Coloured film (each box contains 5 pieces in two colours) may be
used to customise the colour of the backlighting:
•
Blue
Ref. 1143/51
•
Green
Ref. 1143/52
Proceed as shown in the following drawings for fitting the coloured
film and the name tags.
Close the panel front using the tamperproof screws provided at the
end of the operations:
2,9 x 6,5mm
3 x 6mm Fasten screw on
the flush-mounting box
3 x 6mm
Fasten screw on
the flush-mounting box
Brass plate
Opalescent plate
Possible coloured film
(not included)
Fastening nuts
Opalescent plate
Fastening nuts
Temporarily transparent
(or grey PVC) name tag
Glass
Possible coloured film (not included)
