EASIVOICE SYSTEM
ELECTRONIC INTERCOM SYSTEM
sec.2
−−−−
3
EASIVOICE
DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
Mod. 926
ELECTRONIC INTERCOM SYSTEM Mod. 926
Electronic intercom Mod. 926 can be installed in any building for
a simple and effi cient phonic communication system capable of
supporting several communications simultaneously.
Up to 97 intercom door phone can be interconnected. There is no
centralized device to manage the system since each intercom contains
the necessary electronics for handling a dialogue with the rest of the
installation.
There can be up to four independent communications simultaneously.
A general call can be made through an independent fi fth phonic
channel.
Programming is very easy and does not require having to open the
intercom door phone.
There are two versions of the intercom door phone which can be easily
distinguished one from the other by the presence or absence of the
door-opener key:
•
Intercom model
Ref. 926/1
•
Intercom model that can be connected to
a
loudspeaking
unit
Ref. 926/2
There are two versions:
•
Connection to 97 intercoms max. only with intercom service.
•
Connection to 25 intercoms max. with intercom service and with
possibility of answer to outdoor station.
SYSTEM FEATURES
The following is a summary of system features:
•
Connection of a maximum of 97 intercom door phones.
•
Very easy programming of the door phone codes that can be made
directly from outside (of the same door phone).
•
4 simultaneous and independent conversations.
•
Possibility of conference among 4 door phones max.
•
Possibility of busy line insertion.
•
Clearing the line (only from an activated door phone).
•
Possibility to oblige the user to answer.
•
Possibility to route the call to another door phone (follow-me).
This function - if necessary - can be modifi
ed for realizing
automatically the “secretary function”.
•
“Secretary” function, that is the possibility to transfer the incoming
calls from an intercom “x” to a “y” one. Anyway “y” can call “x” and
the last one can make outgoing calls.
•
Paging function carried out by means of a 5th independent and
dedicated line, connected to a loudspeaker by means of an amplifi er
(only from activated intercom/s).
•
Possibility of connection to an amplifi er able to manage sound and
message diffusion with “disk-jockey” function (automatic lowering of
the sound diffusion volume during the sounding message).
•
Possibility to receive door phone calls from a call station appropriately
connected (only for Mod. 926/2).
In case the intercom is already engaged in conversation with another
indoor set, the possible call from the outdoor station is signaled both
visually and acoustically.
•
Automatic lowering of the sound intensity of the beep on the
loudspeaker when the handset is unhooked and the hook is pressed
with a fi nger.
The system utilizes a single phonic ground conductor, therefore
it cannot guarantee absolute secrecy of conversation, i.e. during
the course of a conversation, it may be possible to hear another
conversation in course on another line (crosstalk effect) at a
distance. It will be necessary to adopt appropriate measures to
minimize this problem.
ELECTRONIC INTERCOM SYSTEM Mod. 926
SYSTEM FEATURES - EQUIPMENT - INTERCOM DOOR PHONE FEATURES
EQUIPMENT
The device forming part of the system are as follows:
•
Intercom door phone
Ref. 926/1
•
Intercom door phone and with connection
to
loudspeaking
unit
Ref. 926/2
•
Table kit
Ref. 926/4
•
Power supply for electronic Intercom
Ref. 926/3
INTERCOM DOOR PHONE FEATURES
The intercom door phone can either be installed on a wall or on a
table.
Adaptation kit Ref. 926/4, consisting of an inclined stand to facilitate
the use of the intercom itself, is available for table installations.
INSTALLATION
WALL SET
The intercom should be mounted about 1,5m from the fl oor.
To remove the intercom casing from the base, lift up with a screwdriver
in the area indicated.
Lift off the casing.
Use the screw anchors and screws furnished with the intercom to
fasten the base to the wall.
EASIVOICE
about 1,5m
