16
DS9854-007B
3.
LAN connector
: Ethernet port for wired
connection to the home network.
4.
Jumpers to de
fi
ne the type of power supply
to the device.
Power from external local power
supply (DEFAULT)
DO NOT MOVE
5.
+/- 24V terminals:
external local power supply
terminals.
6.
Terminal board R2, R1, V3, V5, V4
R2: video power positive (+18Vdc).
R1: video power earth.
V3: composite video signal input.
V5: composite video signal (shield) earth.
V4: composite video signal output.
7.
Jumper 6-10
: for selecting closing/separation
of the audio earth to the door opener earth.
Short-circuited audio earth and
door opener earth (DEFAULT)
Separate audio earth and door
opener earth
8.
Jumper A-V
: for selecting the type of door unit
to which the device is connected.
Door phone
Video door phone (DEFAULT)
9.
Jumper 1-1A
: for selecting call type.
Door phone with buzzer
Door phone/ video door phone with
electronic call function (DEFAULT)
10.
Terminal board RD, CA, 10, 9, 1, 2, 6.
RD: video power input/output (positive).
CA: call input (electronic or to buzzer).
10: door opening earth.
9: door opener control.
1: audio output (door phone speaker).
2: audio input (door phone microphone).
6: audio earth.
Power supply (provided)
2
1
NC NC N L
V- V- V+ V+
1.
N, L terminals
: Input voltage 110/230Vac
2.
V-, V+ terminals
: Call-Forwarding device
power voltage output
7.
TECHNICAL
SPECIFICATIONS
Call Forwarding device for 4+N
External input voltage: ..............................
24 V
Maximum absorption: ..............................
200 mA
Absorbed power in operation: ................
max 6 W
Operating temperature: ........................
-5 ÷ +45° C
Max humidity: ............................................
95% RH
Ethernet interface: .............................
10/100 Mbps
Wi-Fi: .........................................................
2.4GHz
(conforms to IEEE 802.11 b/g/n)
with internal antenna
Dimensions (LxHxD):
140 (~8 DIN modules) x 90 x 60 mm.
The product is designed to be
powered by external power supply
Ref. 1083/24 via 24V (6 W, 24 V
)
terminals, with power supply up to the
speci
fi
ed power source requirements
(LPS) and protected against short
circuits and overcurrents according
to EN 60950-1:2006+A11+A1+A12+A2
provisions.
Power supply (provided)
Power supply: ....................
100-240 Vac 50/60 Hz
Power: ..................................................
12 W max
Secondary output: ........................
24 V
0,42A
Power dissipated after after 1 hour of functioning:
max 11 Wh (~40 KJ)
Dimensions (WxHxD):
36 (2 DIN modules) x 98 x 60 mm