GB
Press this button once, to start 10-HOUR-ON delay time; press it again, to switch to 10-HOUR-OFF delay time. AUTO mode
would resume after delay time is up. PIR LED flashes twice upon receiving signal from remote control.
Press this button once, the last setting of Time/Lux/Sens would be duplicated to other sensors. After that, AUTO mode resu-
mes. PIR LED flashes twice upon receiving signal from remote control.
Press this button to enter Auto Mode.
Press this button to enter Alarm Mode. PIR LED flashes twice upon receiving signal from remote control. LUX setting is
inactivated. PIR LED flashes continuously under this mode. When activated, lighting flashes for 30 sec; and in the final 5 sec,
even faster. If delay time is shorter than 30 sec, lighting flashes to delay time. If delay time is longer than 30 sec, lighting
remains ON to delay time after the 30 sec.
Press this button to enter holiday Mode. PIR LED flashes twice upon receiving signal from the remote control. When the
ambient light level is lower than LUX setting, lighting goes ON for 4 hours, and then enters Random Mode (ON or OFF for
5min~15min randomly) for 2 hours. After that, AUTO mode resumes. Such cycle would repeat everyday until other function
mode is selected.
Press this button to enter Test Mode. PIR LED flashes twice upon receiving signal from remote control. Within 5 min, TIME
and LUX are inactivated. At each trigger, lighting goes on for 3 sec. After the 5 min, AUTO mode resumes.
Press this button to learn and store the ambient light level (from 5 to 200 LUX).
Press this button to start setting time value for Time 1.
Press this button to start setting time value for Time 2.
Time value options for Time 1 and Time 2.
Press this button to choose Short impulse as time setting for Time 1 and Time 2, and only. At each trigger, the signal of
1-sec-ON and 9-sec-OFF would be sent to relay. PIR LED is inactivated within the 10 sec.
Press this button to enter Dusk-to-Dawn Mode. When ambient light level is lower than LUX setting, lighting goes ON for 4
hours. After that, AUTO mode resumes. Such cycle repeats everyday until other mode is selected.
Lux setting options, big size Sun for maximum Lux level, small size Moon for minimum level.t.
Sensitivity setting options, 75% and 50%.
Programming via remote control
Description
The Model „McGuard IRFB“ infrared remote control is compatible with motion detectors „McGuard professional,
BM240Ixx“ and BM360Ixx“. It is used to easily set different parameters and special functions. With a range of approx. 6m,
quick and precise programming can be done without tools or ladder.
Key functions
9
