18
DS4501-002
WAN SETTINGS
The WAN setting is used to confi gure the Ethernet port connects to the ADSL Modem/Router.
The default setting is NAT mode for IP PHone, and this enables the embedded NAT router between the LAN port and PC port. You may change
to Bridge Mode if you need NOT use the embedded NAT router. When setting to Bridge Mode, the WAN and the LAN ports will be bridged.
There are three selections for WAN: Fixed IP, DHCP Client, and PPPoE modes. The WAN default is at DHCP Client Mode.
For Fix IP Mode, please make sure the IP address. Net Mask, Gateway, and DNS settings are suitable in your current network environment.
For PPPoE Mode, you have to enter correct username and password to get the IP address from your Internet Service Provider.
When you fi nished the setting, please click the Submit button.
