urmet domus 1145/1, User Manual

Page: 7 / 24

DS1145-019A 7
1.4 DEVICE COMPONENTS INSTALLATION
Wall installation
By this installation, are only used the 1145/5X compact box and 1145/3XX
cover to protect the device against the rain. It replaces all the mechanical
parts. To install the device screw on the box to the wall with pins, as shown in
the figure.
Wall mounting
The 1145/5X frame is fixed to the wall. Take care of the opening direction for mounting, if the 1145/51
square box is used: its axis must be vertical.
The protecting frame (used to hide the wall imperfections when the box is fixed to the wall) and the hood
(necessary for outdoor installations) are other useful accessories for this kind of installation. If in the
environment can be present condensate problems (fast changes of temperature) or rain, it is suggested to
connect the jumper to the basic module - heating ON.
The heating board has two positive functions: it heats the circuits in winter and avoids the condensate.
2 DEVICE OPERATIONS
2.1 SIGNALS
The device signals the sound conditions that may occur during operations. Another signal can be done with
the red LED (under the microphone hole).
Condition Tones Tone frequency LED
Seize the line – ▄ – ■ – ▀ – 425-850-1275 on
Hang up – ▀ – ■ – ▄ 1275-850-425 off
Report after call – ▄ – ■ – ▀ – 425-850-1275 on
Confirmation from phone –– █ –– 425
Dial DTMF/Pulse on
Call on
Call ending signal – ■ – ■ – ■ – 1275 on
Access programming from phone – ■ – ■ – ■ – 850 on
Programming from phone –– ▓ – ▓ ––––– mod. 850 on
Confirmation of a parameter –– █ –– on
Connection to line (Reset) – ■ – ▄ – ■ – 1275-850-1275 blinks
Error (incorrect parameter)
– ■ – ■ – ■ – ■ – ■ – ■ –
425….
Empty memory (no programmed
numbers)
– █ – ▄ – ■ – ▄ – ■ – ▄ –
850-1275-1700…