BASIC SYSTEM DIAGRAMS
INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY
20
−−−−
sec.1f
DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL
IN TRADITIONAL CALL SYSTEM VIDEO DOOR PHONES SYSTEMS
REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL IN TRADITIONAL
CALL SYSTEM VIDEO DOOR PHONES SYSTEMS
RANGER VIDEO DOOR PHONES
BRACKET Ref. 1202/590 FOR ADAPTING COAX VIDEO DOOR PHONE SYSTEMS
Ranger video door phones Ref. 1201/1 (and respective brackets Ref. 1201/90) can be replaced in traditional call video door phone systems with
Atlantico video door phones Ref. 1702/1 and specifi c bracket Ref. 1202/590.
The terminals on Ref. 1202/590 brackets have the same numbers as the Ref. 1201/90 brackets to replace simply by connecting the wires in the
same way.
Note that the replacement is only possible in systems fi tting Ranger basic model Ref. 1201/1 with bracket Ref. 1201/90. It is not possible in
systems with switchboard, special systems and intercom systems because bracket Ref. 1202/590 is not suitable for replacing special brackets
Ref. 1201/91, Ref. 1201/761, Ref. 1201/711, Ref. 1201/731 and Ref. 1201/751.
BRACKET Ref. 1202/591 FOR ADAPTING VIDEO DOOR PHONE SYSTEMS WITHOUT COAXIAL CABLE
Ranger video door phones Ref. 955/5 with brackets Ref. 955/74 can be replaced in 5-wire systems with Atlantico video door phones Ref. 1702/1
using adapter bracket Ref. 1202/591.
Replacement is only possible in basic systems.
EXPLORER, VEDETTE, SENTINEL AND VIDOFONO VIDEO DOOR PHONES
SENTRY VIDEO DOOR PHONE WITH BRACKET Ref. 1704/20A FOR ADAPTING EXPLORER, VEDETTE, SENTINEL AND VIDOFONO
SYSTEMS
EXPLORER, VEDETTE and SENTINEL video door phones can be replaced with Ref. 1704/20A video door phones in traditional call
video door phone systems.
Ref. 1704/20A is a video door phone with a 4.5” kinescope screen arranged on the longest side in the horizontal direction.
The Ref. 1704/20A bracket terminals have the same numbers as the EXPLORER, VEDETTE, SENTINEL and VIDOFONO terminal
boards to simply connect the wires in the same way.
This video door phone can be fi tted only in traditional basic systems (with 12Vac call). It is not suitable for use in switchboard or intercom systems
because the bracket is not suitable to replace all versions.
Ref. 1704/20A is complete with bracket and white. The monitor is a refl ex version; brightness and contrast can be adjusted by means
of the controls. The call signal is sent to the buzzer fi tted on the bracket. The door lock can be released by pressing the “
” button. The two
service buttons “
” and “
” can be used to operate accessory circuits.
Ref. 1704/20A video door phones are used to view the picture from a camera arranged to frame a fi eld with the longest side arranged
vertically. This arrangement causes a 25 to 30% reduction of the framed fi eld with respect to EXPLORER, VEDETTE, SENTINEL and VIDOFONO
video door phones.
video door phone is provided with an additional speaker to considerably increase volume of the call.
Connecting the wires to the system is fast via terminal boards on the bracket to which the video door phone is then fi tted.
(C3)
(C2)
(C5)
(C9)
(C1)
(C4)
(C7)
(C10)
(C6)
(C8)
[1]
[2]
[6]
[10]
[7]
[9]
[X1]
[X2]
[Y1]
[Y2]
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
Ref.1704/20
Vedette,Vidofono
Sentinel,Explorer
Explorer
Sentinel
Scout
Vedette
Vidofono
RISING COLUMN
TO THE FOLLOWING VIDEO DOOR PHONES
