urmet domus 1067/024, Installation Manual

Page: 53 / 120

DS1067-063D
53
LBT20064
5.3 PREPARING THE 1067/024 - 1067/032A CONTROL PANEL
IMPORTANT! During installation of the control panel, be very careful to not accidentally damage the mother
board.
5.3.1 Opening the cover
To open the 1067/024 or 1067/032A control panel cover use the Allen wrench provided for the purpose to unscrew the
two screws (Genia
®
method) like shown in Figure 15 .
Figure 15 - Opening the 1067/024 - 1067/032A control panel
5.3.2 Openings for cables
The figure below illustrates all the set-up for running the cables (power supply, bus, signalling detectors and devices,
potential telephone line) of the 1067/024 or 1067/032A control panel.
Figure 16 - Set-up for running cables
The set-up for running the cables are:
A - for embedded corrugated tube;
B - for rectangular wall duct;
C - for rectangular wall duct or rigid tube;
D - for corrugated tube dedicated to the 230 Vac power supply.
F
– points for anchoring cables with bands.
F
F