2
DS1067-107A
ENGLISH
WARNING:
This document contains important information on the product for installing, configuring and
updating the software. For more detailed information, see the Urmet Secure app installation manual which
can be downloaded from the www.urmet.com website.
GENERAL DESCRIPTION
The IOTC 1067/011 interface is an optional device, which can be used to remotely manage the control
units Ref. 1067/024 and Ref. 1067/032A using a mobile device and/or tablet via a modem router.
The device can be connected to the LAN network in two ways:
WiFi
Ethernet (cable)
Make sure you can connect to the Internet through the home network.
From a mobile device and/or tablet you can:
Totally or partially arm the system.
Totally or partially disarm the system.
Receive notifications of any alarms.
Check the status of the alarms and their details in real time.
Check the status of operation of the system in real time.
Read the contents of the control panel history.
Exclude/Include any intrusion inputs.
Activate/Deactivate any outputs programmed as commandable.
WARNING:
Before
installing, configuring and running functional tests, you must have a mobile device
(smartphone or tablet) on which to install the dedicated Urmet Secure app.
Using the mobile device read the label with the QR code present on the product and proceed with the
installation of the Urmet Secure app.
Legend Figure 1:
A.
Reset and Programming button
B.
QR Code label
C.
4-way dip-switch
D.
Tamper
E.
Terminal board for bus
F.
Ethernet RJ45 connector
G. Led system status/Reset Parameter
Dip-switch
Use
DIP 1
Not used
DIP 2
Not used
DIP 3
Not used
DIP 4
Tamper
Urmet Secure
Fig. 1
A
G
C
D
D
E
F
B
