5
Functions Table
Functions
Descriptions
1. Copy
Copies data from source device to targets. (There are four copy modes
in function "6.2 Copy Area")
2. Compare
Verifies the targets to the source device to ensure copy accuracy.
3. Copy+Compare
Automatically launches compare function after copy is completed.
4. Erase
4.1 Quick Erase
Erases device(s)’ index table.
4.2 Full Erase
Erases entire device(s) complying with NIST 800-88 Standards.
4.3 DoD Erase
Erases device(s) complying with DoD 5220.22-M Standards.
4.4 DoD EraseComp
Erase device(s) complying with DoD 5220.22-M Standards and verifies
complete erasure.
4.5 Secure Erase
Erases the non-loadable areas complying with NIST 800-88 Standards.
5. Utility
5.1 Show Device Info
Displays basic information such as device model, name, capacity, etc.
5.2 Update
System
5.2.1 Update BIOS
Updates system firmware through the rear SD port or
the source port.
5.2.2 Create Update HDD
Prepares by formatting the device to a 2GB FAT
partition to accept firmware file.
5.3 System Info.
Displays system information such as controller, model number,
software version, etc.
5.4 Read Speed
(Available on PV400E and PV800.)
Calculate the device’s read speed by reading.
5.5 Write Speed
(Available on PV400E and PV800.)
Calculate the device’s write speed by reading. This function will
change the device’s content and format.
5.6 Calc. CRC64
Calculates the CRC64 value of the source device.
