ureach ImageExpress-IT1100, User Manual

Page: 13 / 20

13
Chapter 2 - Function Introduction
6.2 Skip Error
This function sets the number of error you like to skip during copy process.
6.3 Erase Master
It is set to allow erase source HDD or not. Please make sure this setting before
you execute erase function.
6.4 Unknown Format
This function allows you to select if you want to copy the unknown format area.
6.4.1 Copy unknown
Copy all the unknown area if device can not identify the format during copy.
6.4.2 Skip unknown
Skip the unknown area if device can not identify the format during copy.
[Skip Error]
0
If the HDD is very critical for content correctness, it is strongly
recommended to keep the Skip Error to be "0".
[Erase Master]
Disable
[Erase Master]
Enable
[Unknown Format]
Copy Unknown
[Unknown Format]
Skip Unknown