URC TRF-GE1, Owner'S Manual

Page: 7 / 21

Page 3
TRF-GE1 G E
XTENDER
Pairing: Place the TRF-GE1 G in pairing mode by pressing and
holding the Pairing button for three seconds. For pairing a TRG-
100/200 with a TRF-GE1 G, refer to the section:
Pairing a TRF-GE1
G with a TRG-100/200.
l
Entering pairing mode: Successfully entering the pairing
mode is confirmed by the following LED responses:
Power LED: Turns ON.
Status LED: Flashes orange ON and OFF.
Data LED: Remains OFF.
l
Confirmation of pairing: A successful pairing between a TRF-
GE1 and a TRG-100/200 is confirmed with the following LED
responses:
Power LED: Turns ON.
Status LED: Flashes green ON and OFF three times.
Data LED: Remains OFF.