3
Total Control
MRX-12
Owner’s Manual
Rear Panel Description
Below are the rear panel ports:
1. Power:
Attach the included power supply here.
2. USB:
For future expansion.
3. LAN:
RJ45 10/100/1000 Ethernet port.
4. IR Outputs:
Six (6) standard 3.5mm IR emitter ports with two output
level adjustment screws for outputs five (5) and six (6).
5. Relay:
Single programmable relay at NO, NC, or COM.
6. 12V Out:
Single programmable output. May be programmed to turn on,
off, or momentarily toggle.
7. Sensors:
Two (2) sensor ports that allow the programming of state
dependent and triggered macros. Compatible with all URC sensors.
8. RS232:
Two (2) RS-232 ports. Supports TX, RX, and GND connections for
wired two-way communication.
USB
Power
LAN
Relay
Sensors
RS-232
12V/0.2A Out
IR Outputs
