6
Installation Instructions:
Prior to installing URC architectural speakers, assure that speaker wire has been run
from the equipment or volume control location to each potential speaker location:
1. Determine and
select a location
for each speaker.
2. Mark the hole to cut out for the speaker using the
supplied template
. If
installing speakers near a side wall, remember to allow for the size of the
speaker bezel.
Location Considerations:
Choose a location for each speaker that is free of any
obstructions created by joists, HVAC ductwork, electrical wire
runs, plumbing or anything else that might not allow for the
depth of the speaker or create interference or noise.
Template Diameter:
Summary of Contents for Total Control 2.0 SP-DV6
Page 1: ......
