Smart 1-Line
TM
Page 23
4.1.2
Detailed Breaker Data
While in Run Mode, any breaker that is actively communicating will have a Red symbol color or
Black symbol color. If the breaker is in this state, you can tap or click on the breaker symbol to
obtain additional information. See the Figure below for guidance on where to tap or click the symbol.
Tap or click the curved portion of the symbol, see below.
Figure 23: Breaker symbol - area to tap
After tapping or clicking on the breaker, an additional window will open.
Depending on which trip unit is present different software tabs will appear on the right side of the
window that appears.
Figure 24: Breaker Data Window General Layout
