RESULTS OF THE USE OF, THE
EQUIPMENT, SOFTWARE OR
DOCUMENTATION IN TERMS OF
CORRECTNESS, ACCURACY, RELIABILITY
OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR
HEREIN, TECHNICAL SERVICES
ARE SUPPLIED “AS IS”, WITHOUT ANY
WARRANTY, EXPRESS, STATUTORY OR
IMPLIED, OF ANY KIND. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW,
URC EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS, STATUTORY OR
IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF QUALITY OR
REASONABLE SKILL AND CARE, OR
OUTCOME OR RESULTS. WITHOUT IN ANY
WAY LIMITING THE GENERALITY OF THE
OTHER PROVISIONS HEREIN, WARRANTY
DOES NOT COVER: (I) DAMAGE FROM
MISUSE, NEGLECT OR ACTS OF NATURE,
(II) MODIFICATIONS, (III) INTEGRATION
WITH THIRD PARTY CONTENT (IV) BEYOND
THE WARRANTY PERIOD AND/ OR FAILURE
TO FOLLOW URC WARRANTY CLAIM
PROCEDURE.
The warranty limitations and warranty
disclaimers may not apply to end user in whole
or in part, where such are restricted or excluded
by applicable law and such shall apply to the
maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at
its sole option, repair the URC equipment using
new or comparable rebuilt parts, or exchange
the URC equipment for new or rebuilt
equipment. In the event of a defect, these are
the end user’s exclusive remedies.
All the URC equipment returned for service,
exchange or repair require an RGA number. To
obtain an RGA number, you must complete a
Return Request Form which you may obtain by
calling (914) 835-4484 or contacting URC at
[email protected]. To obtain
warranty service, end user must deliver the
URC equipment, freight prepaid, in its original
packaging or packaging affording adequate
protection to URC at 420 Columbus Avenue,
Valhalla, NY 10595. It is the end user’s
responsibility to backup any macro
programming, artwork, software or other
materials that may have been programmed into
the unit. It is likely that such data, software, or
other materials will be lost during service and
Page 18