4
Complete Control
MX-790 / MX-790
i
Owner’s Manual
Button Lighting
The Button Backlights settings page provides two configurable options
for how the MX-790’s hard buttons should behave.
1. Backlight When Pressed:
Adjusting this setting controls when the hard
button backlight automatically turns on.
A. Yes:
Every time a button is pressed the back light automatically
turns on.
B. No:
The only way to turn on the hard button backlight is to press
the dedicated Light button, located on the upper-right side of the
remote control.
Once all changes have been made, press the Save button. Pressing the Back
button reverts to the remote’s last saved setting.
Note:
Selecting Backlight When Pressed will deplete the batteries faster.
2. Automatic Turn Off:
You can adjust the amount of time the backlight remains
on after a button is pressed. Press the
<
and
>
screen buttons to change the
duration. Pressing the
<
decreases the time in steps down to a minimum of 5
seconds. Pressing the
>
increases the time 8 seconds. Once the setting has
been adjusted, simply press the
Save
button. Pressing the
Back
button
reverts to the remote’s last saved Automatic Turn off setting.
Note:
Increasing the Automatic Turn Off Time will deplete the batteries faster.
