1
2
Firmly connect the power cable to the underside of the light halo
Plug the AC power cable into a nearby power point
STEP 5: PLUG IN
STEP 5: PLUG IN
Power cable
Note that the lighting is pre-programmed to a cycle of 16 hours
on and 8 hours off. Restart the cycle simply by using the ON/OFF
switch at the power point.
We recommend that it’s best “ON” during daylight hours and “OFF”
during the night to support healthy plant growth & rest.
Plugging in at 6:00AM, for example, will provide a cycle as follows:
• 6:00AM (0:600) - 10:00PM (22:00) | “ON”
• 10:00PM (22:00) - 6:00AM (0:600) | “OFF”
STEP 6: ADJUST THE LIGHT
STEP 6: ADJUST THE LIGHT
1
2
Adjust the light halo by gently pushing down on it, until it rests 2-3cm above the canopy
top of your plants
Continue to adjust the height of the halo as the plants
grow by push up or down gently. We recommend
keeping the light halo 2-3cm above the canop
top of your plants at all times.
Push down
gently
2-3cm above
plants
