Urbanworx SMART UXLibra-8B, Instruction Manual

Page: 13 / 16

13
PRODUCT SETUP (APP CONTROL) (Cont.)
CLEANING
TROUBLESHOOTING
The application offers the presentation of such parameters as weight, BMI (Body
Mass Index - Weight to growth ratio), percentage of body fat, muscles, water, and
visceral body fat (visceral fat is the fat found on organs, not directly under the
skin, bone mass and resting motabolism (the minimum amount of calories to be
delivered to the body per day).
Additionally, during subsequent measurements the difference in weight will
appear in relation to the previous (last) measurement.
In addition, you can enable the presentation of additional parameter called
HEALTH INDEX (settings > health index). These are the amount of protein in the
body, obesity level (difference between actual and ideal weight), biological age
(presents the condition of the body calculated on the basis of measurements
made), LBM (lean body mass - body weight without fat).
Cleaning should only be carried out when the device is switched off and cooled
down. The device may only be cleaned with a dry cloth or paper towel.
Do not immerse the device in eater. To clean and disinfect the electrodes and the
surface, use a cloth. Do not use water or any other liquids to clean the device.
ERROR MESSAGES MEANING
Lo Battery is low please replace.
Err Measurement problem, Re-mea-
sure accurately stepping onto and
standing still on the scale. Weight
exceeds over 180KG.
Err2 Problem with measurement of
body composition. Re-measure by
standing on the scale with bare
feet.
FATL Measurement shows body
percentage fat is less than 5%
FATH Measurement shows that
percentage of body fat is higher
than 50%