Insert the second Awning Panel into the Mounting rail, overlapping the adjoining rib. The overlapping
rib of the second panel should be directly under the first pre-punched hole on the right side of the
Mounting Rail. Secure the two panel ribs through the first hole with a #10 x 3/4” Hex Head Screw.
Insert a polystyrene splash block into the Mounting Rail between the two ribs on the first Awning
Panel. The splash blocks have a tight, secure fit and by tilting them forward while inserting, will ease
the process. Install the remaining Awning Panels and splash blocks in the same fashion by aligning
the pre-punched holes in the Mounting Rail with the Awning Panel ribs. The last Awning Panel should
be secure just as the first panel was, allowing the last panel rib to extend beyond the end of the
Mounting Rail and Front Support Channel.
