Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 3 of 4
STEP 3.
LINNEA - 6 DRAWER DRESSER
Wall
3
5
6
4
Align the anti tip brackets (3) to the top back of the case. Insert screws (4) and tighten completely. Do not
over-tighten. Contact your local hardware store to purchase the correct anchors for your wall-type. Align the
brackets to the wall and make sure they line up with the brackets on the back of the case. Screw the brackets
to the wall using the correct anchors. Slide the case to the wall. Leaving a little bit of room between the case
and the wall. Feed the Nylon Strap through both brackets and pull tight.
