CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 5 of 6
STEP 7
Align the Legs (N) as shown. Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten with
suppled Hex Key (P) by turning clockwise. Do Not Overtighten. Screw in the Center Support Leg (O)
clockwise until tight. Align the Cap (M) with the back of the Back Panel (L) as shown. Insert Screw (V)
through both into Nut (W) as shown
.
STEP 8
can damage them.
Align the Back Panel (L) as shown. Insert screws (U). Tighten with screwdriver (not included). You will need to
adjust the levelers for uneven flooring.
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 5 of 6
STEP 7
Align the Legs (N) as shown. Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten with
suppled Hex Key (P) by turning clockwise. Do not overtighten. Screw in the Center Support Leg (O)
clockwise until tight. Align the Cap (M) with the back of the Back Panel (L) as shown. Insert Screw (V)
through both into Nut (W) as shown
.
STEP 8
With help stand the Bookshelf upright making sure you do not lean It on the legs as this can damage them.
Align the Back Panel (L) as shown. Insert screws (U). Tighten with screwdriver (not included). You will need to
adjust the levelers for uneven flooring.
CASTELLA STORAGE UNIT
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 5 of 6
STEP 7
Align the Legs (N) as shown. Insert Bolt (R), Spring Washer (S), and Flat Washer (T). Tighten with
clockwise until tight. Align the Cap (M) with the back of the Back Panel (L) as shown. Insert Screw (V)
through both into Nut (W) as shown
.
STEP 8
can damage them.
Align the Back Panel (L) as shown. Insert screws (U). Tighten with screwdriver (not included). You will need to
adjust the levelers for uneven flooring.
