ENGLISH
4
5
NOTE: When inserting the transmission rod (E) into the column without motor, make sure that the O-rings are
in place.
NOTE: the control console socket (F) which is connected to the motor lead should face the end of the column
(with the motor). It is best to connect the control console and motor at the shortest distance possible to avoid
over-straining the cables.
NOTE: When installing the transmission rod (E),
first insert the end into the column (without motor)
by turning it manually to find a good angle. Then
insert the other end of the transmission rod into
the motor, the distance between the end of the rod
and the motor is 45mm (1inch)
NOTE 2: Please tighten the plastic screw tightly
when the transmission rod is assembled well.