A D G E R ’ S W H A R F
A S S E M B LY A N D M O U N T I N G I N S T R U C T I O N S
JG-1900
MOUNTING INSTRUCTIONS
MOUNTING DIAGRAM
ELECTRICAL CONFIGURATION TABLE
FROM HOME
FROM LUMINAIRE
CONNECT BLACK OR RED (HOT)
HOUSE SUPPLY CIRCUIT WIRE TO:
LUMINAIRE ROUND WIRE (HOT)
CONNECT WHITE (NEUTRAL)
HOUSE SUPPLY CIRCUIT WIRE TO:
LUMINAIRE RIBBED WIRE
(NEUTRAL)
CONNECT GREEN INSULATED OR BARE COPPER (GROUND -) HOUSE
SUPPLY CIRCUIT WIRE AND LUMINAIRE BARE STRANDED WIRE
(GROUND -) TO GREEN GROUND SCREW ON CROSSBAR.
GENERAL NOTE: USE UL LISTED WIRE NUTS FOR THE
WIRING CONNECTIONS IN THIS LUMINAIRE. WRAP WIRE NUT
CONNECTIONS WITH UL LISTED ELECTRICAL TAPE.
FOR QUESTIONS, PLEASE CONTACT CLIENT SERVICES AT:
843.723.8140 OR [email protected]
STEP 1
SHUT OFF THE MAIN ELECTRICAL SUPPLY TO THE JUNCTION
BOX FROM THE FUSE BOX/CIRCUIT BREAKER. TURNING
POWER OFF AT THE SWITCH IS NOT SUFFICIENT.
STEP 2
LOCATE JUNCTION BOX AND ATTACH CROSS-BAR PROVIDED TO
THE JUNCTION BOX.
STEP 3
USING THE WIRE NUTS PROVIDED, MAKE ELECTRICAL
CONNECTIONS BY FOLLOWING THE ELECTRICAL CONFIGURATION
TABLE BELOW. ENSURE THAT ALL ELECTRICAL CONNECTIONS ARE
WRAPPED WITH UL-LISTED ELECTRICAL TAPE.
STEP 4
ATTACH THE FIXTURE TO THE CROSS-BAR USING THE THREADED
NIPPLE AND CAP PROVIDED. BE CAREFUL TO AVOID SCRATCHING
THE FINISH ON THE FIXTURE.
STEP 5
INSTALL LIGHT BULB IN FIXTURE SOCKET AND RESTORE POWER
TO THE CIRCUIT.
STEP 6
CONFIRM PROPER OPERATION OF THE LIGHT FIXTURE.
