2of2
Fixture can
only be
mounted in
the direction
indicated
8”
7.5”
5.5”Sq.
6.5”Sq.
15.5”
4.5”
6.5”
SKU: UQL1200
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4
"
1
NO. PART NUMBER REPLACEMENT PART QTY.
UQL1200
SH
SHADE
1
(1) 100W Medium
Bulb
(Not Supplied)
Base
1
Figure 5
STEP 5
-
Remove Shade
Assembly
A. Remove Shade Assembly
from fixture by unscrewing
Flat Head Screws on the
Fixture Hood.
Shade
Assembly
Flat Head
Screw
Figure 6
STEP 6
-
Install Bulb
A. This fixture uses standard bulb with
medium screw base. Maximum 100
watts.
B. Insert bulb and screw snugly into
place.
C. Re-attach Shade Assembly to fixture
and secure with Flat Head Screws.
Bulb
Socket
Flat Head
Screw
Shade
Assembly
Figure 7
STEP 7
-
Apply Silicone Sealer
A. Make sure exterior wall surface
and fixture backplate are free of
dirt before applying caulk. Using
exterior grade caulk, caulk over
top of backplate and down other
side. Do not caulk bottom of
fixture backplate to ensure
proper moisture drainage.
Your fixture is now assembled
and ready to use. Enjoy!
Exterior
Grade
Caulk
Backplate
STEP 1
Remove Shade Assembly
-
A. Remove Shade Assembly from fixture
by unscrewing Flat Head Screws on
the Fixture Hood.
Replace Shade
Shade
Assembly
Flat Head
Screw
Fixture
Hood
Cup Head
Screw
Cup Head
Screw
Lock Washer
Side
Arm
Shade
Shade Holder
Ring
STEP 2
Replace Shade
-
Quoizel recommends two people
for this step.
A. Remove two Side Arms by
unscrewing Cup Head Screws
on the top and bottom of Shade
Assembly.
B. With one person hold fixed Side
Arms, another person replace
the Shade inside of the Side
Arms.
C. Reassemble removed Side
Arms back onto the Shade
Assembly and secure with Cup
Head Screws. Tighten until
snug.
www.urbanambiance.com
