URAL Motorcycles CT, Owner'S Manual

Page: 24 / 98

PRE-RIDE INSPECTIONS
Prior to each ride you should inspect the motorcycles technical condition for safety. Use
the following pre-ride inspection list to ensure your motorcycle is safe and ready to ride.
1. Check the oil level. Low oil level causes premature wear and possible engine
damage.
2. Check the fuel level.
3. Check the tire pressure. Low tire pressure can cause poor handling, also inspect
the tire for abnormal and/or excessive wear that may lead to a flat tire.
4. Check all lights for proper operations including headlight, running lights, turn
signals, and brake lights.
5. Check the brakes for proper operations and correct fluid level. If for any reason
the brakes feel abnormal or spongy do not ride the bike as it may be unsafe.
6. Inspect all cables to insure they are not pinched or routed improperly; also
inspect the clutch cable for correct free play.
7. Check for any loose fasteners and tighten as necessary.
8. Be sure any luggage is secured before riding.
INSTRUCTIONS FOR INITIAL RIDE
The following steps should be taken prior and during your first ride:
1. Read the entire owner ’ s manual prior to starting and/or taking you first ride.
2. Familiarise yourself with all controls and instruments.
3. Make any required adjustments to mirrors and controls for comfort.
4. Always wear safety gear including but not limited to: helmet, boots, gloves, and
jacket regardless of weather.
5. Ride in a safe environment such as a parking lot or area you are familiar with
while you learn the specific handling characteristics of your new sidecar
motorcycle.
6. Follow the “Engine Run - in” instructions.