URAL Motorcycles 2015 cT, Owner'S Manual, Page: 38 / 95

AIR FILTER INSPECTION & REPLACEMENT
Step 1
Remove the four retaining bolts form the air
box lid using a 5mm hex wrench.
Step 2
Carefully remove the air box lid by lifting the
right side and sliding the lid to the left, be very
careful not to pull wiring and cables near the
air box inlet.
Step 3
Remove the paper filter element for the
housing and inspect for debris. The filter
should be replaced per the maintenance
intervals and/or as need during inspections.
Step 4
Re-install the filter in reverse order, be sure
the replacement filter is fully seated in to the
air box housing and the lid is properly installed
prior to tightening the retaining bolts.
CAUTION
A DIRTY OR CLOGGED AIR FILTER CAN
REDUCE THE PERFORMANCE OF YOU ENGINE
AND POSSIBLY DAMAGE INTERAL ENGINE
PARTS.