Upvel UR-326N4G User Manual Download Page 10 | Manualshive

Page: 10 / 34

background image

You should type the following parameters into the spaces provided:

IP Address - Enter the IP address in dotted-decimal notation provided by your

ISP.

Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your

ISP, usually is 255.255.255.0.

Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal

notation provided by your ISP.

Primary DNS Server - (Optional) Enter the DNS address in dotted-decimal

notation provided by your ISP.

Secondary DNS Server - (Optional) Type another DNS address in dotted-decimal

notation provided by your ISP if provided.
Click the "Apply" button to enable configuration to take effect.
Click the "Cancel" button to cancel the setting.
b.

The router is set up by default as a DHCP (Dynamic Host Configuration Protocol)

server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the router on the LAN.

c. If you choose PPPoE, you should enter the following parameters.

«
...
8
9
10
11
12
...
»

Summary of Contents for UR-326N4G



































Reviews:

No comments

Related manuals for UR-326N4G

Brand: GE Pages: 6

Brand: Paradyne Pages: 112

Brand: Cambium Networks Pages: 215

TotalStorage SAN16M-R SAN

Brand: IBM Pages: 116

Brand: Asante Pages: 150

Brand: Lanner Pages: 38

Brand: Allied Telesis Pages: 34

ApplianceStor 15MT

Brand: Rasilient Pages: 30

Brand: MiWire Pages: 24

Brand: Paradyne Pages: 6

Brand: FOR-A Pages: 37

Brand: Trend Micro Pages: 2

Brand: Patton electronics Pages: 40

Brand: Honeywell Home Pages: 36

Brand: CalAmp Pages: 52

Linktropy MINI-G

Brand: Apposite Technologies Pages: 57

Brand: Commax Pages: 122

Brand: Ryobi Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands