Identifying Front and Rear Panel
English -9
Indicator Light
: the light is red when power is plugged in
but the TV is not turned on. The light turns blue when the TV
is turned on. Because of the LED in the panel, the TV might
take 10 12 seconds to power on.
Front View
Indicator Light
Remote Sensor
Remote Sensor
: the remote sensor receives all the
commands from the remote control.
Mounting Specification : 200mm x 100mm using screw size
M6. Length of screw should not exceed 12mm.
Please Note : The 12mm length of screw refers to how deep
the screw can go inside the mounting holes. When you're
buying screws, you should add the original 12mm to the
thickness of your mounting plate in order to get the total
screw length.
Rear View Mounting Pattern
Side Control Buttons
1. SOURCE : this button switches between all the different
sources of the TV. When the OSD is active, this button
acts as the enter button and confirms the menu selection
2. MENU: this button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will exit the OSD.
3. VOL(
▲
): this button increases the TV's volume. If a
sub-menu is active, pressing this button will move the
select right.
4. VOL( ) : this button decreases the TV's volume. If a
sub-menu is active, pressing this button will move the
selection left.
5. CH(
▲
) : this button changes the TV channel up. If the
OSD is active, this button functions as up for the menu.
6. CH( ) : this button changes the TV channel down. If the
OSD is active, this button functions as down for the menu.
7. STANDBY: turn on the TV by pressing the button once.
Press the button again to turn off the TV. .
▲
▲
S
O
U
R
C
E
M
E
N
U
V
O
L
C
H
S
TA
N
D
BY
: Power on/off
100
200
